Whether you are near the Locust Fork of the Black Warrior, over in the AL-79 corridor, or on the Main Street side of Cleveland, it is the same coverage and the same crew.
Cleveland has enough older housing stock that repair almost always beats replacement here, and enough new construction that we spend a lot of time on hardware that failed early.
Most doors we see are repairable.Call and find out before you price a replacement.
Click to Call (205) 619-2895Common door hinge repair faults in Blount County
These are the door hinge repair faults we are called out to most often in Cleveland. If you recognise one, the underlying cause is usually the second half of the line.
- Rust has locked the pin in placeUntreated steel hinges on an exposed opening, which will keep seizing until they are replaced.
- Commercial door binding against the frameWorn hinges or failed bearings on a heavy door with a closer.
- The door binds only in the last inch of closingA hinge mortised too deep, pushing the door toward the strike as it comes home.
- Two hinges look fine and one is chewed upLoad concentrated on a single hinge because the others are shimmed or set at different depths.
- The door swings open or shut on its ownThe hinges are out of plumb, so gravity is doing the work.
- Hinge screws spin and will not tightenStripped screw holes in the jamb, or screws that only ever reached the jamb and not the framing.
Tell us what the door is doing and we will tell you what it needs.No guesswork over the phone, no pressure.
Click to Call (205) 619-2895Why door hinge repair fails in the Sand Mountain and Lookout Mountain plateau
Snow and sleet are more common here than almost anywhere else in Alabama, and meltwater refreezing in a sliding door track is a recurring winter problem.
Dust settling into hinge knuckles combines with old lubricant and grinds the pin, and once the knuckle has worn oval the door has play in it regardless of how tight the screws are.
A gust catching an open door and slamming it against its stop puts an enormous shock load through the top hinge, and that single event is often what starts a sag that develops over the following months.
None of it is a reason to replace a door. It is a reason to use the right parts and set the door up correctly in the first place.
Local factors we account for in Cleveland: grit and dust and storm wind — typical of the Sand Mountain and Lookout Mountain plateau.
Broken, stuck, or will not lock?Talk to someone who works on these every day.
Click to Call (205) 619-2895What we repair
- Continuous hinge installationFull-length geared hinges for heavy commercial doors that keep tearing out standard hinges.
- Squeak eliminationCleaning, servicing and correctly lubricating hinges so they stay quiet.
- Ball bearing hinge upgradeBearing hinges for heavy doors and doors fitted with closers.
- Long-screw anchoringRunning fasteners through the jamb into the structural framing so the hinge holds the real load.
- Screw hole repairRebuilding stripped holes so fasteners bite properly instead of spinning.
- Door re-hangingTaking the door off and resetting it plumb so it swings and latches correctly.
- Hinge replacementNew hinges sized and rated to the door weight, in matching finishes.
Not sure whether it is a repair or a replacement?Describe the symptoms and we will give you a straight answer.
Click to Call (205) 619-2895How we approach door hinge repair
- Find the hinge that actually failedThe door drags at the latch, but the fault is almost always at the top hinge. We check each one under load.
- Check what the screws are anchored intoMost repeat hinge failures are fastener failures, and that means finding the framing behind the jamb. Plateau jobs get seals and lubricants rated for freezing temperatures, since standard products stiffen and stop working when it matters.
- Repair the mortise before fitting hardwareA new hinge in a damaged mortise will loosen again quickly.
- Size the hinge to the doorA solid or fire-rated door needs hinges rated for its weight. Three light hinges on a heavy slab will always sag again.
- Re-hang and check the revealAn even gap top to bottom, latch side and hinge side, before we go anywhere near the lock.
- Confirm the lock still lines upCorrecting a sag moves the latch, so the strike is checked and adjusted as part of the same visit.
Broken, stuck, or will not lock?Talk to someone who works on these every day.
Click to Call (205) 619-2895What affects the cost of door hinge repair in Cleveland
Pricing on door hinge repair depends on what has actually failed, which is why we talk it through before quoting. These are the things that move the number:
- finish and security hardware selections
- whether the door also needs re-hanging or the strike relocated
- whether the mortises or screw holes need rebuilding first
- how many hinges need replacement versus repair
- standard hinges versus ball bearing or continuous hinges
Call and describe what the door is doing. In most cases we can tell you over the phone which of those applies to you before anyone drives out to Cleveland.
Broken, stuck, or will not lock?Talk to someone who works on these every day.
Click to Call (205) 619-2895Areas we cover for door hinge repair in Cleveland
If you are in the AL-79 corridor and Main Street, or anywhere near the Locust Fork of the Black Warrior and Palisades Park nearby, we cover you.
We also cover the nearby Blount County and the Sand Mountain and Lookout Mountain plateau communities listed further down this page.
Tell us what the door is doing and we will tell you what it needs.No guesswork over the phone, no pressure.
Click to Call (205) 619-2895Door hinge repair in Cleveland: questions we get asked
My door swings open by itself. Can that be fixed?
Yes. That means the hinge line is out of plumb, so the door is rolling downhill. Re-hanging it plumb fixes it, and in Cleveland it often turns up in houses where the frame has moved.
Can hinges be repaired or do they have to be replaced?
Pins, tips and lubrication problems are repairable. Once the knuckles have worn oval and the hinge has play in it, it is done and needs replacing, and putting a new pin in a worn hinge does not help.
How do I know which hinge is the problem?
Look at the gap between the door and the frame down the latch side. If it is tight at the top and wide at the bottom, the top hinge has pulled. That is the one carrying the most load and it fails first.
My door is sagging. Do I need a new door?
Almost never. A sagging door is a hinge problem, usually the top hinge losing its grip on the jamb. Once the fasteners are anchored into the framing properly the door comes back up and latches again.
Do heavy doors need special hinges?
Yes. Solid core, exterior and commercial doors, and any door with a closer on it, should be on ball bearing hinges. Plain butt hinges on a heavy door wear out fast and take the jamb with them.
What makes hinges squeal?
Dry or worn pins, and sometimes grit in the knuckles. In Cleveland the doors that squeal first are usually exterior doors, because moisture strips the lubricant and starts surface corrosion inside the knuckle.
One call gets you an answer.We will tell you what is wrong and what it takes to fix.
Click to Call (205) 619-2895Other door repair services in Cleveland
- Sliding Door Repair Cleveland
Sticking, jumping, or dragging sliding glass doors put back on smooth-rolling track.
- Door Lock Repair Cleveland
Deadbolts, latches, cylinders and strike alignment repaired on residential and commercial doors.
- Door Frame Repair Cleveland
Rotted, split, kicked-in and out-of-square frames rebuilt so the door fits again.
- Door Handle Repair Cleveland
Loose, broken and seized handles, knobs and levers repaired or replaced.
- Patio Door Repair Cleveland
Sliding, French and multi-panel patio doors repaired, realigned and resealed.
- Door Glass Repair Cleveland
Broken, cracked and fogged door glass replaced, including tempered and insulated units.
- Commercial Door Repair Cleveland
Hollow metal, aluminum and high-traffic doors kept working for businesses and property managers.
- Storefront Door Repair Cleveland
Aluminum storefront entrances repaired: pivots, closers, locks, glass and alignment.
- Door Closer Repair Cleveland
Closers adjusted, rebuilt and replaced so doors shut properly instead of slamming or hanging open.
- Automatic Door Repair Cleveland
Automatic sliding and swing doors, operators, sensors and safety systems serviced.
- Screen Door Repair Cleveland
Sliding screens, storm doors and screen panels rescreened, rerolled and rehung.
- French Door Repair Cleveland
Sagging, dragging and drafty French doors realigned, resealed and rehung.
- Interior Door Repair Cleveland
Sticking, sagging, rattling and damaged interior doors made to work properly again.
- Exterior Door Repair Cleveland
Front and back entry doors resealed, realigned, reinforced and repaired.
- Window Repair Cleveland
Sashes, balances, glass, seals and hardware repaired on residential and commercial windows.
Door Hinge Repair near Cleveland
We cover the surrounding Blount County and the Sand Mountain and Lookout Mountain plateau communities as well:
- Door Hinge Repair in Oneonta
- Door Hinge Repair in Locust Fork
- Door Hinge Repair in Blountsville
- Door Hinge Repair in Snead
- Door Hinge Repair in Susan Moore
- Door Hinge Repair in Hayden
- Door Hinge Repair in Remlap
- Door Hinge Repair in Smoke Rise
All door repair services in Cleveland · Door Hinge Repair across Alabama · All Alabama service areas
Most doors we see are repairable.Call and find out before you price a replacement.
Click to Call (205) 619-2895