Alabama Sliding Door Repair Statewide door & window repair Click to Call (205) 619-2895
Home Alabama Deatsville Screen Door Repair

Deatsville, Alabama · Elmore County

Screen Door Repair in Deatsville, AL

We repair sliding patio screens, hinged screen doors, storm doors and screen enclosures, and we rescreen with mesh chosen for what the door actually has to put up with: pets, sun, or fine insects.

  • Repair first, replace last
  • Homes & businesses
  • Elmore County covered
  • Straight answers on the phone

Click to Call (205) 619-2895

Screen Door Repair diagram
Screen Door Repair — Deatsville, Alabama

Whether you are near Lake Jordan, over in the AL-143 corridor, or on the Old Ridge Road side of Deatsville, it is the same coverage and the same crew.

Deatsville has enough older housing stock that repair almost always beats replacement here, and enough new construction that we spend a lot of time on hardware that failed early.

Tell us what the door is doing and we will tell you what it needs.No guesswork over the phone, no pressure.

Click to Call (205) 619-2895

What Deatsville customers call us about

These are the screen door repair faults we are called out to most often in Deatsville. If you recognise one, the underlying cause is usually the second half of the line.

  • The latch does not line upThe door has sagged or the frame has moved.
  • Corners have come apartFailed corner keys, which are replaceable.
  • The storm door closer has torn out of the frameWind caught the door; the mounting needs repair and a wind chain fitted.
  • It takes real effort to slideSeized rollers or a track full of packed debris.
  • The frame is bent or racked out of squareUsually from being forced back into a track it was not sitting right in.
  • The mesh has a shiny worn stripe near the handleAbrasion from contact with the track or jamb, meaning the frame is no longer running true.

Most doors we see are repairable.Call and find out before you price a replacement.

Click to Call (205) 619-2895

What Deatsville weather does to screen door repair

Remnants of Gulf systems still carry serious rain this far inland, and doors on the south and west sides of a house take the brunt of it.

Wind gets behind a screen panel and pushes it out of the track, and on hinged screen and storm doors a gust catching the door is what tears closers out of the frame.

Humidity corrodes the steel components in screen rollers and rusts the tiny springs in adjusters, so screens seize up and drop out of their track.

Knowing that is the difference between a repair that holds through a Deatsville summer and one that does not.

Local factors we account for in Deatsville: storm wind and sustained humidity — typical of the River Region.

Most doors we see are repairable.Call and find out before you price a replacement.

Click to Call (205) 619-2895

What a screen door repair call covers

  • Solar screen installationSolar mesh to cut heat gain through screened openings.
  • Frame repair and squaringStraightening bent frames and replacing corner keys.
  • Sliding screen replacementCustom-built replacement screen panels where the original is beyond repair.
  • Screen enclosure and porch panel repairRescreening porch and patio enclosure panels.
  • Pet mesh and pet grille installationHeavy-duty mesh and lower grilles for doors that dogs push against.
  • Wind chain and closer installationProtecting storm doors from wind damage.
  • RescreeningNew mesh and spline in standard fiberglass, pet-resistant, solar or fine no-see-um mesh.

Need it looked at soon?Call and we will tell you honestly when we can get there.

Click to Call (205) 619-2895

How we approach screen door repair

  1. Check it against the openingWe run the frame through its travel and watch where it tightens, which shows whether the fault is the frame or what it runs in.
  2. Assess the frame for squareA racked frame will not sit in the track properly no matter what mesh is in it.
  3. Choose mesh for the jobStandard, pet-resistant, solar or fine insect mesh. The right one depends on the door, the exposure and what tore the last one. Openings here get assessed for drainage as well as alignment, since summer storms find any weakness at the sill.
  4. Rescreen with correct tensionEven tension and properly seated spline so the mesh does not sag or pull out of the channel.
  5. Fit and adjust the rollersSet so the panel rides smoothly and stays captured in the head channel.
  6. Test the full travelEnd to end, several times, with the latch engaging cleanly at the close.

One call gets you an answer.We will tell you what is wrong and what it takes to fix.

Click to Call (205) 619-2895

What affects the cost of screen door repair in Deatsville

We would rather tell you what drives the price than quote a number that turns out to be wrong once we see the door. On a screen door repair job in Deatsville, the main variables are these:

  • the mesh type chosen, from standard fiberglass to pet-resistant and solar
  • the size of the panel
  • roller and track work in addition to the screen itself
  • storm door hardware such as closers and latches
  • custom-built replacement panels where the original is not repairable

Call and describe what the door is doing. In most cases we can tell you over the phone which of those applies to you before anyone drives out to Deatsville.

One call gets you an answer.We will tell you what is wrong and what it takes to fix.

Click to Call (205) 619-2895

Areas we cover for screen door repair in Deatsville

Deatsville coverage runs across the AL-143 corridor and Old Ridge Road, and out to the areas around Lake Jordan and the Coosa River.

Service area: Deatsville, Elmore County, Alabama — and the surrounding communities.

We also cover the nearby Elmore County and the River Region communities listed further down this page.

Broken, stuck, or will not lock?Talk to someone who works on these every day.

Click to Call (205) 619-2895

Screen door repair in Deatsville: questions we get asked

My storm door blew open and broke. Can it be repaired?

Usually yes: the closer and its mounting take the damage. We repair the mounting and fit a wind chain so the next gust does not do the same thing.

The screen slides hard even though it is not falling out. What is wrong?

Either the rollers have seized or the track is packed with debris. In Deatsville the track collects a surprising amount of grit, and it acts like grinding paste on the rollers.

My screen mesh has gone brittle and crumbles. What happened?

UV exposure. Screens on the south and west sides of a house in Deatsville take a lot of sun, and standard fiberglass mesh eventually degrades. Solar mesh lasts longer and cuts heat at the same time.

Is it worth rescreening or should I just buy a new screen door?

Rescreening is far cheaper and the frame is usually fine. New panels only make sense when the frame is bent beyond straightening or the corners are gone.

What mesh should I use if I have dogs?

Pet-resistant mesh, which is a heavier vinyl-coated polyester, and often a pet grille across the lower section. Standard fiberglass will not survive a dog that pushes against it.

Can you make a screen that keeps out the tiny biting insects?

Yes, fine no-see-um mesh. It has a much tighter weave, and in the parts of Elmore County near water it is the only thing that actually works against the smallest biters.

Get a real diagnosis, not a sales pitch.We fix doors for a living.

Click to Call (205) 619-2895

Other door repair services in Deatsville


Screen Door Repair near Deatsville

We cover the surrounding Elmore County and the River Region communities as well:

All door repair services in Deatsville  ·  Screen Door Repair across Alabama  ·  All Alabama service areas

Get a real diagnosis, not a sales pitch.We fix doors for a living.

Click to Call (205) 619-2895
Click to Call (205) 619-2895Tap to speak to a door repair tech now