We service every part of Mount Vernon, including the US-43 corridor and Main Street, and the nearby Mobile County towns like Prichard and Tillmans Corner.
A lot of what we see in Mobile County comes down to age. Houses built decades ago have solid frames with tired hardware; houses built recently have sound hardware in frames that are still settling.
Not sure whether it is a repair or a replacement?Describe the symptoms and we will give you a straight answer.
Click to Call (205) 619-2895When to call about door closer repair
These are the door closer repair faults we are called out to most often in Mount Vernon. If you recognise one, the underlying cause is usually the second half of the line.
- Mounting screws have pulled the door skin outwardA closer fitted to a hollow door without a reinforcing plate.
- The hold-open function has stopped workingWorn hold-open mechanism in the arm.
- The door closes fast then stops shortMismatched sweep and latch speed settings.
- A fire door that stays openSerious safety issue: failed closer or a hold-open that should be releasing.
- The closer arm is bentThe door has been forced open past its stop, usually by wind or by a cart.
- The door does not close the last inchClosing force is too low, or the door is binding on the frame in the final approach.
Tell us what the door is doing and we will tell you what it needs.No guesswork over the phone, no pressure.
Click to Call (205) 619-2895What we see on door closer repair around Mobile County
Between roughly 65 inches of rain a year, near-constant humidity and a June-to-November hurricane season, coastal doors work harder than doors anywhere else in Alabama.
Humidity swells a wood door so it drags in the frame during the final approach, and turning the closer up to overcome that makes the door punishingly heavy to open while doing nothing about the actual cause.
Salt air corrodes closer arm pivots and the exposed spindle where it enters the closer body, and once that seal is compromised the closer starts weeping oil and its life is effectively over.
It is why the same repair done properly in Mount Vernon lasts, and the same repair done cheaply does not.
Local factors we account for in Mount Vernon: sustained humidity and salt air — typical of the Alabama Gulf Coast.
Broken, stuck, or will not lock?Talk to someone who works on these every day.
Click to Call (205) 619-2895Door closer repair work we handle in Mount Vernon
- Accessibility force adjustmentSetting opening force to meet accessibility requirements without losing reliable latching.
- Delayed action setupAdding delayed closing for accessibility so people have time to get through.
- Surface closer replacementNew surface mounted closers sized correctly for door width and weight.
- Arm and bracket replacementReplacing bent arms, broken forearms and failed mounting brackets.
- Closer adjustmentSetting sweep speed, latch speed and backcheck correctly for the door and its traffic.
- Hold-open arm serviceRepairing and adjusting hold-open functions.
- Floor closer repairServicing and replacing floor-mounted closers under heavy entrance doors.
One call gets you an answer.We will tell you what is wrong and what it takes to fix.
Click to Call (205) 619-2895How a Mount Vernon door closer repair visit works
- Watch the door close, twiceThe speed of the last few inches and the first few tells us most of what we need to know before we touch a valve.
- Rule out the door before blaming the closerA door binding on the frame makes a perfectly good closer look weak, and turning the closer up is the wrong answer.
- Check for the simple faultsLoose arm fixings, a bent forearm or a seized pinion account for a lot of closers that look dead.
- Size the replacement properlyDoor width, weight and exposure decide the power size. An undersized closer will not shut the door; an oversized one shuts out anyone who is not strong. We check the drainage path on every coastal opening, because wind-driven rain gets in where ordinary rain never would.
- Set for people, not just latchingOpening force is checked so the door is usable by everybody, then latch speed is set so it still closes properly.
- Fit a stop where it is neededA door with no stop will destroy its own closer the first time the wind catches it.
Need it looked at soon?Call and we will tell you honestly when we can get there.
Click to Call (205) 619-2895What affects the cost of door closer repair in Mount Vernon
What a door closer repair job costs comes down to a handful of things, and we would rather be straight about them up front:
- adding overhead stops or hold-open functions
- adjustment versus rebuild versus full replacement
- whether the mounting has to be repaired or reinforced
- fire rating and accessibility compliance requirements
- the size and weight of the door and its exposure to wind
Call and describe what the door is doing. In most cases we can tell you over the phone which of those applies to you before anyone drives out to Mount Vernon.
Not sure whether it is a repair or a replacement?Describe the symptoms and we will give you a straight answer.
Click to Call (205) 619-2895Areas we cover for door closer repair in Mount Vernon
Coverage in Mount Vernon takes in the US-43 corridor and Main Street, plus everything around the Mount Vernon Arsenal historic site and the Mobile River.
We also cover the nearby Mobile County and the Alabama Gulf Coast communities listed further down this page.
Most doors we see are repairable.Call and find out before you price a replacement.
Click to Call (205) 619-2895Door closer repair in Mount Vernon: questions we get asked
Our fire door is propped open. Is that a problem?
Yes, and it is one of the most common code violations we see. A fire door that cannot close and latch is not doing anything. If it gets propped because it is hard to use, that is the problem to solve.
Can I adjust the closer myself?
The valves are accessible, but they are easy to over-adjust and some closers will lose their spring tension entirely if a valve is backed out too far. If you are not sure which valve does what, it is worth a call first.
My door slams every time. Can that be adjusted?
Almost always. There is a latch speed valve on the closer that controls the last few inches, and it has probably drifted or been set wrong. Adjusting it takes minutes and saves your frame, hinges and hardware from a lot of abuse.
What size closer do I need?
It depends on the door width, weight and exposure. Exterior doors in Mobile County also need to handle wind, and an undersized closer on a windy exposure gets destroyed.
Do door closers need different settings in summer and winter?
They can. The hydraulic fluid thins in heat and thickens in cold, so a closer set perfectly in Mount Vernon in August may close too slowly in January. Quality closers hold their setting better across the temperature swing.
There is oil dripping from my door closer. Can it be refilled?
No. Closers are sealed units, and once the seal fails the closer is finished. Refilling is not possible on standard units and the unit needs replacing.
Tell us what the door is doing and we will tell you what it needs.No guesswork over the phone, no pressure.
Click to Call (205) 619-2895Other door repair services in Mount Vernon
- Sliding Door Repair Mount Vernon
Sticking, jumping, or dragging sliding glass doors put back on smooth-rolling track.
- Door Lock Repair Mount Vernon
Deadbolts, latches, cylinders and strike alignment repaired on residential and commercial doors.
- Door Frame Repair Mount Vernon
Rotted, split, kicked-in and out-of-square frames rebuilt so the door fits again.
- Door Handle Repair Mount Vernon
Loose, broken and seized handles, knobs and levers repaired or replaced.
- Door Hinge Repair Mount Vernon
Sagging doors, stripped hinge screws, squealing pins and worn knuckles put right.
- Patio Door Repair Mount Vernon
Sliding, French and multi-panel patio doors repaired, realigned and resealed.
- Door Glass Repair Mount Vernon
Broken, cracked and fogged door glass replaced, including tempered and insulated units.
- Commercial Door Repair Mount Vernon
Hollow metal, aluminum and high-traffic doors kept working for businesses and property managers.
- Storefront Door Repair Mount Vernon
Aluminum storefront entrances repaired: pivots, closers, locks, glass and alignment.
- Automatic Door Repair Mount Vernon
Automatic sliding and swing doors, operators, sensors and safety systems serviced.
- Screen Door Repair Mount Vernon
Sliding screens, storm doors and screen panels rescreened, rerolled and rehung.
- French Door Repair Mount Vernon
Sagging, dragging and drafty French doors realigned, resealed and rehung.
- Interior Door Repair Mount Vernon
Sticking, sagging, rattling and damaged interior doors made to work properly again.
- Exterior Door Repair Mount Vernon
Front and back entry doors resealed, realigned, reinforced and repaired.
- Window Repair Mount Vernon
Sashes, balances, glass, seals and hardware repaired on residential and commercial windows.
Door Closer Repair near Mount Vernon
We cover the surrounding Mobile County and the Alabama Gulf Coast communities as well:
- Door Closer Repair in Prichard
- Door Closer Repair in Tillmans Corner
- Door Closer Repair in Saraland
- Door Closer Repair in Chickasaw
- Door Closer Repair in Satsuma
- Door Closer Repair in Theodore
- Door Closer Repair in Semmes
- Door Closer Repair in Citronelle
All door repair services in Mount Vernon · Door Closer Repair across Alabama · All Alabama service areas
Broken, stuck, or will not lock?Talk to someone who works on these every day.
Click to Call (205) 619-2895