Most of our Tarrant calls come from the Ford Avenue corridor and Pinson Valley Parkway, though we work the whole Jefferson County side of it and get out to Bessemer regularly.
Between the established parts of Tarrant and the newer subdivisions, we see two different kinds of failure: worn-out frames on one side of town and worn-out hardware on the other.
Tell us what the door is doing and we will tell you what it needs.No guesswork over the phone, no pressure.
Click to Call (205) 619-2895When to call about door closer repair
These are the door closer repair faults we are called out to most often in Tarrant. If you recognise one, the underlying cause is usually the second half of the line.
- Mounting screws have pulled the door skin outwardA closer fitted to a hollow door without a reinforcing plate.
- Grinding from a floor closerWorn spindle or bearings in the floor unit.
- The door slamsLatch speed valve out of adjustment, or a closer that has failed internally.
- The arm has come loose at the forearm connectionA backed-out or stripped screw, which will bend the arm if it is left.
- The closer arm is bentThe door has been forced open past its stop, usually by wind or by a cart.
- Oil running down the door or the wallFailed seal inside the closer body. The unit needs replacing.
Tell us what the door is doing and we will tell you what it needs.No guesswork over the phone, no pressure.
Click to Call (205) 619-2895How conditions in Tarrant affect door closer repair
The metro runs humid from April to October, then flips to freezing nights in January, and hardware that was fine in August starts binding in winter.
Humidity swells a wood door so it drags in the frame during the final approach, and turning the closer up to overcome that makes the door punishingly heavy to open while doing nothing about the actual cause.
Dust in the arm pivots and the shoe makes the linkage bind, and a binding linkage produces exactly the symptoms people blame on the closer's internal valves.
We factor that in on every door closer repair job around Five Mile Creek and the rest of Tarrant.
Local factors we account for in Tarrant: sustained humidity and grit and dust — typical of the Birmingham metro.
One call gets you an answer.We will tell you what is wrong and what it takes to fix.
Click to Call (205) 619-2895Our door closer repair services in Tarrant
- Wind and stop protectionFitting overhead stops so wind cannot destroy the closer arm.
- Mounting repairRepairing or reinforcing door and frame where closer fasteners have pulled out.
- Spring hinge and closer conversionReplacing failed spring hinges with a proper closer where the door needs it.
- Delayed action setupAdding delayed closing for accessibility so people have time to get through.
- Accessibility force adjustmentSetting opening force to meet accessibility requirements without losing reliable latching.
- Hold-open arm serviceRepairing and adjusting hold-open functions.
- Floor closer repairServicing and replacing floor-mounted closers under heavy entrance doors.
Broken, stuck, or will not lock?Talk to someone who works on these every day.
Click to Call (205) 619-2895What happens when we get there
- Watch the whole cycle, twiceOpening force, sweep speed, latch speed and backcheck. Each is a separate adjustment and each fails differently.
- Rule out the door before blaming the closerA door binding on the frame makes a perfectly good closer look weak, and turning the closer up is the wrong answer.
- Adjust before replacingMany closers we are called to are serviceable and simply out of adjustment. That is a much smaller job and we say so.
- Match to the opening's dutyA fire door, an accessible entrance and an internal office door have different requirements, and the specification follows the door.
- Set for people, not just for latchingThe door needs to close and latch every time and still be openable by someone with limited strength. We flush the running surfaces properly on metro jobs rather than just wiping them, since fine clay packs into places a cloth will not reach.
- Fit a stop where it is neededA door with no stop will destroy its own closer the first time the wind catches it.
Tell us what the door is doing and we will tell you what it needs.No guesswork over the phone, no pressure.
Click to Call (205) 619-2895What affects the cost of door closer repair in Tarrant
Pricing on door closer repair depends on what has actually failed, which is why we talk it through before quoting. These are the things that move the number:
- adjustment versus rebuild versus full replacement
- fire rating and accessibility compliance requirements
- adding overhead stops or hold-open functions
- whether the mounting has to be repaired or reinforced
- surface, concealed or floor mounted closer type
Call and describe what the door is doing. In most cases we can tell you over the phone which of those applies to you before anyone drives out to Tarrant.
Tell us what the door is doing and we will tell you what it needs.No guesswork over the phone, no pressure.
Click to Call (205) 619-2895Areas we cover for door closer repair in Tarrant
Tarrant coverage runs across the Ford Avenue corridor and Pinson Valley Parkway, and out to the areas around Five Mile Creek and the Tarrant industrial corridor.
We also cover the nearby Jefferson County and the Birmingham metro communities listed further down this page.
Need it looked at soon?Call and we will tell you honestly when we can get there.
Click to Call (205) 619-2895Door closer repair in Tarrant: questions we get asked
Our fire door is propped open. Is that a problem?
Yes, and it is one of the most common code violations we see. A fire door that cannot close and latch is not doing anything. If it gets propped because it is hard to use, that is the problem to solve.
Do you work on floor closers?
Yes. Floor closers under heavy entrance doors are serviceable, though they are more involved to work on because the unit sits in the floor.
Do door closers need different settings in summer and winter?
They can. The hydraulic fluid thins in heat and thickens in cold, so a closer set perfectly in Tarrant in August may close too slowly in January. Quality closers hold their setting better across the temperature swing.
What size closer do I need?
It depends on the door width, weight and exposure. Exterior doors in Jefferson County also need to handle wind, and an undersized closer on a windy exposure gets destroyed.
There is oil dripping from my door closer. Can it be refilled?
No. Closers are sealed units, and once the seal fails the closer is finished. Refilling is not possible on standard units and the unit needs replacing.
My door slams every time. Can that be adjusted?
Almost always. There is a latch speed valve on the closer that controls the last few inches, and it has probably drifted or been set wrong. Adjusting it takes minutes and saves your frame, hinges and hardware from a lot of abuse.
Need it looked at soon?Call and we will tell you honestly when we can get there.
Click to Call (205) 619-2895Other door repair services in Tarrant
- Sliding Door Repair Tarrant
Sticking, jumping, or dragging sliding glass doors put back on smooth-rolling track.
- Door Lock Repair Tarrant
Deadbolts, latches, cylinders and strike alignment repaired on residential and commercial doors.
- Door Frame Repair Tarrant
Rotted, split, kicked-in and out-of-square frames rebuilt so the door fits again.
- Door Handle Repair Tarrant
Loose, broken and seized handles, knobs and levers repaired or replaced.
- Door Hinge Repair Tarrant
Sagging doors, stripped hinge screws, squealing pins and worn knuckles put right.
- Patio Door Repair Tarrant
Sliding, French and multi-panel patio doors repaired, realigned and resealed.
- Door Glass Repair Tarrant
Broken, cracked and fogged door glass replaced, including tempered and insulated units.
- Commercial Door Repair Tarrant
Hollow metal, aluminum and high-traffic doors kept working for businesses and property managers.
- Storefront Door Repair Tarrant
Aluminum storefront entrances repaired: pivots, closers, locks, glass and alignment.
- Automatic Door Repair Tarrant
Automatic sliding and swing doors, operators, sensors and safety systems serviced.
- Screen Door Repair Tarrant
Sliding screens, storm doors and screen panels rescreened, rerolled and rehung.
- French Door Repair Tarrant
Sagging, dragging and drafty French doors realigned, resealed and rehung.
- Interior Door Repair Tarrant
Sticking, sagging, rattling and damaged interior doors made to work properly again.
- Exterior Door Repair Tarrant
Front and back entry doors resealed, realigned, reinforced and repaired.
- Window Repair Tarrant
Sashes, balances, glass, seals and hardware repaired on residential and commercial windows.
Door Closer Repair near Tarrant
We cover the surrounding Jefferson County and the Birmingham metro communities as well:
- Door Closer Repair in Bessemer
- Door Closer Repair in Homewood
- Door Closer Repair in Vestavia Hills
- Door Closer Repair in Mountain Brook
- Door Closer Repair in Hueytown
- Door Closer Repair in Center Point
- Door Closer Repair in Gardendale
- Door Closer Repair in Irondale
All door repair services in Tarrant · Door Closer Repair across Alabama · All Alabama service areas
One call gets you an answer.We will tell you what is wrong and what it takes to fix.
Click to Call (205) 619-2895