Alabama Sliding Door Repair Statewide door & window repair Click to Call (205) 619-2895
Home Alabama Frisco City French Door Repair

Frisco City, Alabama · Monroe County

French Door Repair in Frisco City, AL

The characteristic French door problem is the doors rubbing where they meet. That is almost always hinge sag on one or both leaves, and it gets blamed on the doors swelling far more often than swelling is actually responsible.

  • Repair first, replace last
  • Homes & businesses
  • Monroe County covered
  • Straight answers on the phone

Click to Call (205) 619-2895

French Door Repair diagram
French Door Repair — Frisco City, Alabama

Most of our Frisco City calls come from Main Street and the AL-21 corridor, though we work the whole Monroe County side of it and get out to Monroeville regularly.

Frisco City has enough older housing stock that repair almost always beats replacement here, and enough new construction that we spend a lot of time on hardware that failed early.

Broken, stuck, or will not lock?Talk to someone who works on these every day.

Click to Call (205) 619-2895

Common french door repair faults in Monroe County

These are the french door repair faults we are called out to most often in Frisco City. If you recognise one, the underlying cause is usually the second half of the line.

  • You can see the meeting stiles are no longer parallelOne leaf has racked, which no amount of adjustment at the lock will correct.
  • The doors rub where they meetOne or both leaves have dropped on their hinges.
  • Screws visible pulling out of hingesHinge fasteners failing under the weight of a heavy glazed leaf.
  • There is a step you can feel between the two door facesThe leaves are no longer in the same plane, generally a hinge or frame issue rather than a door one.
  • The astragal weatherstrip is compressed flat in one areaPoint loading where the leaves bind, and the seal has stopped working there.
  • Cold air pouring in down the middleFailed astragal weatherstrip on the joint between the leaves.

Get a real diagnosis, not a sales pitch.We fix doors for a living.

Click to Call (205) 619-2895

Frisco City conditions and french door repair

Blowing sand gets into everything down here. Tracks, screen channels, thresholds and lock cylinders all collect it, and it acts like sandpaper on moving parts.

Storm wind on a pair of French doors loads the meeting stile and the flush bolts, and if the inactive leaf is not solidly bolted top and bottom, the wind will find that out for you.

Salt corrodes the multipoint lock rods and gearboxes inside French doors, and because those components are hidden inside the door edge, the failure arrives without warning when the handle finally will not turn.

We see the pattern often enough across Monroe County that we usually know what we are looking at before we arrive.

Local factors we account for in Frisco City: storm wind and salt air — typical of the Alabama Gulf Coast.

Get a real diagnosis, not a sales pitch.We fix doors for a living.

Click to Call (205) 619-2895

Our french door repair services in Frisco City

  • Hinge repair and re-hangingCorrecting sag with proper fasteners into framing and re-hanging leaves plumb.
  • Security upgradesReinforced strikes, longer fasteners and better flush bolts on exterior pairs.
  • Interior French door serviceAlignment, hardware and hinge work on interior pairs.
  • Frame squaringCorrecting frames that have moved and taken the doors out with them.
  • Threshold and sill workNew adjustable thresholds and sill seals under a pair of doors.
  • Astragal and weatherstrip replacementNew seals on the meeting stile so the middle joint actually closes.
  • Multipoint lock repairRepairing and replacing multipoint gearboxes, drive rods and keepers.

Most doors we see are repairable.Call and find out before you price a replacement.

Click to Call (205) 619-2895

How a Frisco City french door repair visit works

  1. Measure the reveal all the way roundThe gap pattern between the leaves and the frame tells us what has moved before we touch any hardware.
  2. Check each leaf on its ownWith the inactive leaf bolted, we test the active one, then reverse it. Faults that look shared usually are not.
  3. Get both leaves back in planeIf the door faces are stepped, no amount of lock adjustment will make the pair meet correctly.
  4. Rebuild the seal at the meeting stileAstragal weatherstrip is the hardest working seal on the door and it is usually the one that has been ignored.
  5. Set the locking hardwareKeepers adjusted so the shootbolts engage top and bottom with the handle lifting smoothly and no forcing.
  6. Test both leaves through a full cycleBoth doors should close, latch and seal without force. Coastal jobs get stainless or coated fixings as standard, since anything else here is a return visit waiting to happen.

Need it looked at soon?Call and we will tell you honestly when we can get there.

Click to Call (205) 619-2895

What affects the cost of french door repair in Frisco City

Every french door repair call in Monroe County is a little different, and the cost follows what the door actually needs:

  • multipoint lock repair versus full gearbox replacement
  • whether one leaf or both need re-hanging
  • interior versus exterior pairs, since exterior work includes weatherproofing
  • glass replacement in individual lites
  • whether the frame itself has moved and needs correcting

Call and describe what the door is doing. In most cases we can tell you over the phone which of those applies to you before anyone drives out to Frisco City.

Get a real diagnosis, not a sales pitch.We fix doors for a living.

Click to Call (205) 619-2895

Areas we cover for french door repair in Frisco City

We work throughout Frisco City, including Main Street and the AL-21 corridor. If you are near the Frisco City depot and Monroeville just north, that is inside our normal service area.

Service area: Frisco City, Monroe County, Alabama — and the surrounding communities.

We also cover the nearby Monroe County and the Alabama Gulf Coast communities listed further down this page.

Need it looked at soon?Call and we will tell you honestly when we can get there.

Click to Call (205) 619-2895

French door repair in Frisco City: questions we get asked

Can sagging French doors be fixed without replacing them?

Yes, and it is the usual outcome. The fix is proper hinge repair with fasteners reaching the structural framing, plus re-hanging the leaf plumb. Replacing a pair of French doors is a large job by comparison.

How long does French door repair take?

Most alignment and weatherstrip jobs in Frisco City take two to four hours. Multipoint gearbox replacement or glass work can add time, especially if parts need ordering for a specific manufacturer.

Can one lite of glass be replaced or does the whole door need doing?

Individual lites can normally be replaced on their own. That is one of the advantages of a true divided or simulated divided light door.

How do I stop water coming in under my French doors?

Usually the threshold seal and the sill pan. A pair of exterior French doors has a hard job at the bottom of the meeting stile, and in Monroe County storms that is where water finds its way in.

Do you work on interior French doors too?

Yes. Interior pairs have simpler hardware but exactly the same alignment problems, and they are usually a quick fix.

Why will my multipoint lock not throw anymore?

The door has moved, so the lock points no longer line up with their keepers in the frame. Forcing the handle in that state is how the gearbox breaks, so it is worth correcting the alignment before something expensive fails.

Tell us what the door is doing and we will tell you what it needs.No guesswork over the phone, no pressure.

Click to Call (205) 619-2895

Other door repair services in Frisco City


French Door Repair near Frisco City

We cover the surrounding Monroe County and the Alabama Gulf Coast communities as well:

All door repair services in Frisco City  ·  French Door Repair across Alabama  ·  All Alabama service areas

Not sure whether it is a repair or a replacement?Describe the symptoms and we will give you a straight answer.

Click to Call (205) 619-2895
Click to Call (205) 619-2895Tap to speak to a door repair tech now