Our territory takes in New Brockton and the communities around it in Coffee County, so calls from Main Street, the US-84 corridor and out by the New Brockton depot all get the same response.
The mix of housing here matters for door work. Older New Brockton homes have wood frames and hardware worth repairing rather than replacing, while newer construction tends to have vinyl and aluminum systems where the moving parts wear out long before anything else does.
One call gets you an answer.We will tell you what is wrong and what it takes to fix.
Click to Call (205) 619-2895Common door closer repair faults in Coffee County
These are the door closer repair faults we are called out to most often in New Brockton. If you recognise one, the underlying cause is usually the second half of the line.
- The door closes fast then stops shortMismatched sweep and latch speed settings.
- Grinding from a floor closerWorn spindle or bearings in the floor unit.
- The door is very hard to push openCloser over-tensioned, often to compensate for a door that will not latch.
- Different behavior in summer and winterFluid viscosity changing with temperature, which needs seasonal adjustment or a temperature-stable closer.
- The hold-open function has stopped workingWorn hold-open mechanism in the arm.
- The door slams open against the wallBackcheck has failed or is not adjusted, and the arm and frame are taking the impact.
Most doors we see are repairable.Call and find out before you price a replacement.
Click to Call (205) 619-2895How conditions in New Brockton affect door closer repair
The Wiregrass gets punishing summer heat and enough tropical rain that hurricane remnants are a normal part of the year, not an exception. Sally and Michael both did door and window damage this far inland.
Grit in the arm pivots and the slide track of a closer makes the action gritty and uneven, and a closer fighting friction in its own linkage cannot deliver consistent latch speed.
Wind is the main killer of door closers: a gust drives the door past its opening limit, bends the arm and often tears the mounting out of the door, which is why an overhead stop is not optional on an exposed door.
None of it is a reason to replace a door. It is a reason to use the right parts and set the door up correctly in the first place.
Local factors we account for in New Brockton: blowing sand and storm wind — typical of the Wiregrass.
Most doors we see are repairable.Call and find out before you price a replacement.
Click to Call (205) 619-2895What we repair
- Arm and bracket replacementReplacing bent arms, broken forearms and failed mounting brackets.
- Concealed closer serviceOverhead concealed closers in aluminum storefront doors repaired or replaced.
- Closer adjustmentSetting sweep speed, latch speed and backcheck correctly for the door and its traffic.
- Mounting repairRepairing or reinforcing door and frame where closer fasteners have pulled out.
- Spring hinge and closer conversionReplacing failed spring hinges with a proper closer where the door needs it.
- Wind and stop protectionFitting overhead stops so wind cannot destroy the closer arm.
- Floor closer repairServicing and replacing floor-mounted closers under heavy entrance doors.
Most doors we see are repairable.Call and find out before you price a replacement.
Click to Call (205) 619-2895How a New Brockton door closer repair visit works
- Watch the whole cycle, twiceOpening force, sweep speed, latch speed and backcheck. Each is a separate adjustment and each fails differently.
- Rule out the door firstA closer struggling against a binding door is not a faulty closer. Hinges and reveal get checked before we condemn the unit.
- Check for the simple faultsLoose arm fixings, a bent forearm or a seized pinion account for a lot of closers that look dead.
- Size the replacement properlyCloser size depends on door width and weight and on whether it faces exterior wind. Undersized closers fail early.
- Set for people, not just for latchingThe door needs to close and latch every time and still be openable by someone with limited strength.
- Fit a stop where it is neededA door with no stop will destroy its own closer the first time the wind catches it. Sandy-soil jobs get their running surfaces cleaned out thoroughly, because new rollers fitted into a gritty track will not last a year.
Get a real diagnosis, not a sales pitch.We fix doors for a living.
Click to Call (205) 619-2895What affects the cost of door closer repair in New Brockton
We would rather tell you what drives the price than quote a number that turns out to be wrong once we see the door. On a door closer repair job in New Brockton, the main variables are these:
- the size and weight of the door and its exposure to wind
- whether the mounting has to be repaired or reinforced
- surface, concealed or floor mounted closer type
- adjustment versus rebuild versus full replacement
- adding overhead stops or hold-open functions
Call and describe what the door is doing. In most cases we can tell you over the phone which of those applies to you before anyone drives out to New Brockton.
Need it looked at soon?Call and we will tell you honestly when we can get there.
Click to Call (205) 619-2895Areas we cover for door closer repair in New Brockton
Our New Brockton service area includes Main Street and the US-84 corridor and the surrounding Coffee County communities, out around the New Brockton depot and Fort Rucker nearby.
We also cover the nearby Coffee County and the Wiregrass communities listed further down this page.
One call gets you an answer.We will tell you what is wrong and what it takes to fix.
Click to Call (205) 619-2895Door closer repair in New Brockton: questions we get asked
What size closer do I need?
It depends on the door width, weight and exposure. Exterior doors in Coffee County also need to handle wind, and an undersized closer on a windy exposure gets destroyed.
Can I adjust the closer myself?
The valves are accessible, but they are easy to over-adjust and some closers will lose their spring tension entirely if a valve is backed out too far. If you are not sure which valve does what, it is worth a call first.
Do door closers need different settings in summer and winter?
They can. The hydraulic fluid thins in heat and thickens in cold, so a closer set perfectly in New Brockton in August may close too slowly in January. Quality closers hold their setting better across the temperature swing.
My door slams every time. Can that be adjusted?
Almost always. There is a latch speed valve on the closer that controls the last few inches, and it has probably drifted or been set wrong. Adjusting it takes minutes and saves your frame, hinges and hardware from a lot of abuse.
Do you work on floor closers?
Yes. Floor closers under heavy entrance doors are serviceable, though they are more involved to work on because the unit sits in the floor.
How long do door closers last?
A good quality closer on a properly hung door can run for well over a decade. A cheap closer on a heavy exterior door in New Brockton might last a couple of years, especially if it is fighting a misaligned door.
Need it looked at soon?Call and we will tell you honestly when we can get there.
Click to Call (205) 619-2895Other door repair services in New Brockton
- Sliding Door Repair New Brockton
Sticking, jumping, or dragging sliding glass doors put back on smooth-rolling track.
- Door Lock Repair New Brockton
Deadbolts, latches, cylinders and strike alignment repaired on residential and commercial doors.
- Door Frame Repair New Brockton
Rotted, split, kicked-in and out-of-square frames rebuilt so the door fits again.
- Door Handle Repair New Brockton
Loose, broken and seized handles, knobs and levers repaired or replaced.
- Door Hinge Repair New Brockton
Sagging doors, stripped hinge screws, squealing pins and worn knuckles put right.
- Patio Door Repair New Brockton
Sliding, French and multi-panel patio doors repaired, realigned and resealed.
- Door Glass Repair New Brockton
Broken, cracked and fogged door glass replaced, including tempered and insulated units.
- Commercial Door Repair New Brockton
Hollow metal, aluminum and high-traffic doors kept working for businesses and property managers.
- Storefront Door Repair New Brockton
Aluminum storefront entrances repaired: pivots, closers, locks, glass and alignment.
- Automatic Door Repair New Brockton
Automatic sliding and swing doors, operators, sensors and safety systems serviced.
- Screen Door Repair New Brockton
Sliding screens, storm doors and screen panels rescreened, rerolled and rehung.
- French Door Repair New Brockton
Sagging, dragging and drafty French doors realigned, resealed and rehung.
- Interior Door Repair New Brockton
Sticking, sagging, rattling and damaged interior doors made to work properly again.
- Exterior Door Repair New Brockton
Front and back entry doors resealed, realigned, reinforced and repaired.
- Window Repair New Brockton
Sashes, balances, glass, seals and hardware repaired on residential and commercial windows.
Door Closer Repair near New Brockton
We cover the surrounding Coffee County and the Wiregrass communities as well:
- Door Closer Repair in Enterprise
- Door Closer Repair in Elba
- Door Closer Repair in Greenville
- Door Closer Repair in Georgiana
- Door Closer Repair in Luverne
- Door Closer Repair in Evergreen
- Door Closer Repair in Troy
- Door Closer Repair in Brundidge
All door repair services in New Brockton · Door Closer Repair across Alabama · All Alabama service areas
Need it looked at soon?Call and we will tell you honestly when we can get there.
Click to Call (205) 619-2895