Redland is part of our regular Elmore County territory, and between the Redland Road corridor, Rifle Range Road and the Wetumpka just north area we are here most weeks.
A lot of what we see in Elmore County comes down to age. Houses built decades ago have solid frames with tired hardware; houses built recently have sound hardware in frames that are still settling.
Most doors we see are repairable.Call and find out before you price a replacement.
Click to Call (205) 619-2895Common sliding door repair faults in Elmore County
These are the sliding door repair faults we are called out to most often in Redland. If you recognise one, the underlying cause is usually the second half of the line.
- You can lift the panel visibly in its openingExcess head clearance from a sagging header, which is what lets it jump the track.
- The door takes both hands to moveAlmost always flat-spotted or seized rollers, sometimes a track that has worn into a trough.
- It slides fine one way and binds the otherOne roller of the tandem pair has collapsed, so the panel is running out of level.
- The track has a raised lip you can catch a fingernail onAluminium track peened over by a panel that has been running on bare wheel housings.
- The door will not latch anymoreThe panel has settled out of square, so the hook or mortise latch no longer lines up with the keeper.
- The door bounces or chatters as it movesFlat spots worn onto nylon roller wheels that have been running on grit.
Most doors we see are repairable.Call and find out before you price a replacement.
Click to Call (205) 619-2895What Redland weather does to sliding door repair
Remnants of Gulf systems still carry serious rain this far inland, and doors on the south and west sides of a house take the brunt of it.
Long humid stretches keep condensation on the cold aluminum frame of a slider almost continuously, and that moisture rusts roller axles and adjustment screws from the inside, which is why the screws often shear when someone finally tries to adjust the door.
Sun loading on a west-facing patio slider expands the aluminum frame through the afternoon and degrades the vinyl weatherstrip and the glazing gaskets, so the door that slides fine at nine in the morning is tight by four.
It is why the same repair done properly in Redland lasts, and the same repair done cheaply does not.
Local factors we account for in Redland: sustained humidity and sun and heat load — typical of the River Region.
One call gets you an answer.We will tell you what is wrong and what it takes to fix.
Click to Call (205) 619-2895What we repair
- Latch and keeper repairRebuilding or replacing mortise latches, hook latches and strike keepers.
- Weep hole clearingOpening blocked sill drainage so the track sheds water instead of holding it.
- Frame squaringShimming and refastening frames that have shifted out of square.
- Multi-panel and pocket door serviceAlignment and hardware work on stacking and pocketing patio systems.
- Panel realignmentRe-plumbing and adjusting the panel so it latches and seals across the full height.
- Anti-lift and security hardwareTrack locks, foot bolts and anti-lift blocks fitted to the panel.
- Roller replacementTandem steel or nylon roller assemblies matched to the door manufacturer and panel weight.
Get a real diagnosis, not a sales pitch.We fix doors for a living.
Click to Call (205) 619-2895How a Redland sliding door repair visit works
- Start with the openingBefore the panel comes out we check the header for deflection and the sill for level, because a door cannot run true in an opening that is not.
- Get the glass out of the way safelyA patio panel is heavy and awkward. We take it out properly so the track and the roller housings can actually be seen.
- Match the hardwareSliding door rollers are not universal. We identify the manufacturer and panel weight and fit the right tandem assembly rather than the closest thing on the truck.
- Bring the running surface backA pitted or peened track will destroy new rollers in a season, so it gets dressed, capped or replaced before anything goes back in.
- Level the panel, then set the heightBoth adjusters are wound together so the panel sits level and the interlock engages along its whole length, not just at the top. Openings here get assessed for drainage as well as alignment, since summer storms find any weakness at the sill.
- Hand it back working the way you use itWe open and close it the way you would, one-handed, and check the lock, the screen and the drainage before we leave.
Tell us what the door is doing and we will tell you what it needs.No guesswork over the phone, no pressure.
Click to Call (205) 619-2895What affects the cost of sliding door repair in Redland
We would rather tell you what drives the price than quote a number that turns out to be wrong once we see the door. On a sliding door repair job in Redland, the main variables are these:
- whether the frame has moved and needs shimming or refastening
- how many panels the system has, since three and four panel doors take longer to set
- the age of the door and whether replacement hardware is still made for it
- the size and weight of the panel, since heavy insulated glass units need heavier assemblies
- how much damage the worn track has taken before the call
Call and describe what the door is doing. In most cases we can tell you over the phone which of those applies to you before anyone drives out to Redland.
Get a real diagnosis, not a sales pitch.We fix doors for a living.
Click to Call (205) 619-2895Areas we cover for sliding door repair in Redland
Coverage in Redland takes in the Redland Road corridor and Rifle Range Road, plus everything around Wetumpka just north and the Coosa River valley.
We also cover the nearby Elmore County and the River Region communities listed further down this page.
One call gets you an answer.We will tell you what is wrong and what it takes to fix.
Click to Call (205) 619-2895Sliding door repair in Redland: questions we get asked
Can a sliding door that has stopped rolling be fixed, or does it need replacing?
Almost always fixed. The frame and glass are usually fine and it is the two small roller assemblies underneath that have failed. Replacing a whole patio door in Redland is a several thousand dollar job; rebuilding the rollers and track is a fraction of that and gets you a door that rolls better than it has in years.
Do you repair the older aluminum sliding doors?
Yes, and there are a lot of them in Redland. Aluminum frames from the sixties through the eighties are actually good candidates for repair because the frame material has not degraded; it is the rollers, the track surface and the weatherstrip that have worn out.
Why does my sliding door work fine in winter and stick in summer?
That is a moisture and expansion problem, and it is common across Elmore County. Humid months swell wood and vinyl components and expand the frame slightly, which is enough to close up clearance that was already marginal because of worn rollers.
Do you work on the big multi-panel and stacking patio doors?
Yes. Those systems put a lot of weight on each roller and they are less forgiving of a frame that is even slightly out of square, so alignment work matters more on them than on a standard two-panel door.
What does it mean when there is water pooling in the track?
The weep holes that drain the sill are blocked. It is one of the most common causes of water on the floor inside, and it is also one of the easiest things to fix, but if it sits long enough it rusts the roller assemblies out.
How long does a sliding door repair take?
Most single roller-and-track jobs in Redland take one to two hours. Multi-panel doors, doors with damaged tracks that need capping, or units that also need glass work take longer, and we tell you which category yours falls into before we start.
Need it looked at soon?Call and we will tell you honestly when we can get there.
Click to Call (205) 619-2895Other door repair services in Redland
- Door Lock Repair Redland
Deadbolts, latches, cylinders and strike alignment repaired on residential and commercial doors.
- Door Frame Repair Redland
Rotted, split, kicked-in and out-of-square frames rebuilt so the door fits again.
- Door Handle Repair Redland
Loose, broken and seized handles, knobs and levers repaired or replaced.
- Door Hinge Repair Redland
Sagging doors, stripped hinge screws, squealing pins and worn knuckles put right.
- Patio Door Repair Redland
Sliding, French and multi-panel patio doors repaired, realigned and resealed.
- Door Glass Repair Redland
Broken, cracked and fogged door glass replaced, including tempered and insulated units.
- Commercial Door Repair Redland
Hollow metal, aluminum and high-traffic doors kept working for businesses and property managers.
- Storefront Door Repair Redland
Aluminum storefront entrances repaired: pivots, closers, locks, glass and alignment.
- Door Closer Repair Redland
Closers adjusted, rebuilt and replaced so doors shut properly instead of slamming or hanging open.
- Automatic Door Repair Redland
Automatic sliding and swing doors, operators, sensors and safety systems serviced.
- Screen Door Repair Redland
Sliding screens, storm doors and screen panels rescreened, rerolled and rehung.
- French Door Repair Redland
Sagging, dragging and drafty French doors realigned, resealed and rehung.
- Interior Door Repair Redland
Sticking, sagging, rattling and damaged interior doors made to work properly again.
- Exterior Door Repair Redland
Front and back entry doors resealed, realigned, reinforced and repaired.
- Window Repair Redland
Sashes, balances, glass, seals and hardware repaired on residential and commercial windows.
Sliding Door Repair near Redland
We cover the surrounding Elmore County and the River Region communities as well:
- Sliding Door Repair in Millbrook
- Sliding Door Repair in Wetumpka
- Sliding Door Repair in Tallassee
- Sliding Door Repair in Eclectic
- Sliding Door Repair in Coosada
- Sliding Door Repair in Deatsville
- Sliding Door Repair in Elmore
- Sliding Door Repair in Holtville
All door repair services in Redland · Sliding Door Repair across Alabama · All Alabama service areas
Broken, stuck, or will not lock?Talk to someone who works on these every day.
Click to Call (205) 619-2895